/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion
Rejoignez la plus grande communauté de réparation au monde
HP Envy TouchSmart 15 Digitizer Replacement

HP Envy TouchSmart 15 Digitizer Replacement

Micah Kempf

Micah Kempf et 6 autres contributeurs

Dernière mise à jour le January 4, 2024

30 minutes - 2 heures
Modérée

Introduction

Passez à l'étape 1

Use this guide to replace the digitizer screen on an HP Envy 15 TouchSmart. You may need to replace the digitizer if the laptop no longer detects touch or if the glass has cracked or shattered.

Ce dont vous avez besoin

Pièces

Outils

Afficher plus…

iFixit touche une commission lorsque vous achetez par l'intermédiaire de ces liens.

  1. HP Envy TouchSmart 15 Digitizer Replacement, Touch Screen/Digitizer: étape 1, image 1 de 1

    • Lay the laptop down with the bottom facing up.

    Traduire

  2. HP Envy TouchSmart 15 Digitizer Replacement: étape 2, image 1 de 1

    • Slide the switch to release the battery and remove it.

    Traduire

  3. HP Envy TouchSmart 15 Digitizer Replacement: étape 3, image 1 de 2 HP Envy TouchSmart 15 Digitizer Replacement: étape 3, image 2 de 2

    • Remove the screw from the access panel. Gently lift and remove the panel.

    Traduire

  4. HP Envy TouchSmart 15 Digitizer Replacement: étape 4, image 1 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 4, image 2 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 4, image 3 de 3

    • Remove the hard drive and disconnect its ribbon cable from both the hard drive and the motherboard.

    Traduire

    Gently pry up on black ribbon clank then slide ribbon off motherboard

    chewfie - Réponse

  6. HP Envy TouchSmart 15 Digitizer Replacement: étape 5, image 1 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 5, image 2 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 5, image 3 de 3

    • Remove the screws to loosen the bottom casing.

    • Remove the two feet to reveal the screws underneath.

    Traduire

    Description missed two screws on removing the back cover.

    Jacob - Réponse

  7. HP Envy TouchSmart 15 Digitizer Replacement: étape 6, image 1 de 1

    • Gently pry the edges to loosen the case.

    • Once loose, lift and remove the plastic casing to reveal the motherboard.

    Traduire

  8. HP Envy TouchSmart 15 Digitizer Replacement: étape 7, image 1 de 2 HP Envy TouchSmart 15 Digitizer Replacement: étape 7, image 2 de 2

    • Lift and detach the wireless antenna cables.

    • Lift and de-route the wires from their tracks until you reach the display hinges.

    Traduire

  9. HP Envy TouchSmart 15 Digitizer Replacement: étape 8, image 1 de 1

    • Detach the two cables. Lift the tab for the ribbon cable before pulling it out.

    Traduire

  10. HP Envy TouchSmart 15 Digitizer Replacement: étape 9, image 1 de 2 HP Envy TouchSmart 15 Digitizer Replacement: étape 9, image 2 de 2

    • Remove the screws from each hinge.

    • Lift the hinges with pliers until they are perpendicular to the case.

    • Lift and remove the bottom of the laptop from the screen.

    Traduire

  11. HP Envy TouchSmart 15 Digitizer Replacement: étape 10, image 1 de 1

    • Lift the tabs in both the bottom corners and remove the screws beneath.

    Traduire

  12. HP Envy TouchSmart 15 Digitizer Replacement: étape 11, image 1 de 2 HP Envy TouchSmart 15 Digitizer Replacement: étape 11, image 2 de 2

    • Using a pry tool as necessary, remove the digitizer from the rest of the screen panel. Be careful around the top edge as there are delicate components beneath.

    Traduire

    Forgot to mention disconnecting the wire from the digitizer to the screen.

    Jacob - Réponse

  13. HP Envy TouchSmart 15 Digitizer Replacement: étape 12, image 1 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 12, image 2 de 3 HP Envy TouchSmart 15 Digitizer Replacement: étape 12, image 3 de 3

    • Using a heat gun, carefully loosen the adhesive connecting the digitizer to its plastic border.

    • Gently peel the digitizer away from the plastic border.

    • When installing the new one digitizer, press firmly around the edges.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Micah Kempf

Membre depuis le 03/30/16

260 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

Michigan Tech, Team 1-12, Lauer Spring 2016 Membre de l'équipe Michigan Tech, Team 1-12, Lauer Spring 2016

MTU-LAUER-S16S1G12

1 membre

1 tutoriel rédigé

4 commentaires de tutoriel

These directions are perfect. I was able to successfully change my digitizer in under an hour

Joe Russo - Réponse

where do you get the digitizer?

Jacob - Réponse

Amazing,

My name is Nevelson, I have exactly same laptop and mine also is broke, but I don't know where to get the replacement; only the sensor, please I need help and willing to pay handsomely.

Nevelson Odimgbe - Réponse

Nevelson, I have updated this page to included a link to the part on amazon.

Micah Kempf - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 29

Total : 14,360