Kindle Paperwhite 1st Generation Case Replacement

Dernière mise à jour le October 14, 2024

15 - 30 minutes

Modérée

Introduction

The case of your Kindle Paperwhite gets a lot of abuse from everyday life. Replace a cracked or a scratched case to restore that fresh out-of-the-box feeling.

Ce dont vous avez besoin

Outils

Afficher plus…

iFixit touche une commission lorsque vous achetez par l'intermédiaire de ces liens.

Étape 1 Case

Kindle Paperwhite 1st Generation Case Replacement, Case: étape 1, image 1 de 2

Kindle Paperwhite 1st Generation Case Replacement, Case: étape 1, image 2 de 2

Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel.
Do not insert the spudger too far under the bezel; it could easily damage the screen.

Modifier

I found it easier to start this step off with one of the Opening Picks found in the iOpener pack.

NathanF - 27 déc. 2017 Réponse

The glue on bezel started to peel the sticky back protective layer off the screen for me - managed to smooth it back down, although now have an unsightly crease. I would try to hold the screen down when you pull the bezel off to stop damaging the screen.

Callum Rogers - 27 août 2021 Réponse

This step is most time consuming. Take you time and try not to scratch the bezel :)

Oleksii - 1 sept. 2021 Réponse

Couldn't get the plastic spudger under the edge of the bezel. A right-angle X-Acto blade was a satisfactory tool here.

dbrick - 29 mai 2022 Réponse

The glue was VERY difficult...I used a trick, from taking apart phones, and used a hair drier to loosen up the glue...worked like a charm.

billkaris - 9 août 2022 Réponse

Étape 2

Kindle Paperwhite 1st Generation Case Replacement: étape 2, image 3 de 3

Remove the eleven 3.0 mm Phillips screws surrounding the midframe.
At the top of the display, a strip of black tape covers one screw.

Modifier

On 3G version you will not have the top middle screw.

BJones - 21 mai 2016 Réponse

Hello, the original battery is 1420m Ah and 3.7VDC, but the buttery you offer to sell is 1600mAh, is it right? there is no problem with different mAh? mi kindle is the amazon kindle 1est generation

Paula Ponce de Leon - 9 nov. 2020 Réponse

Étape 3

Lift the midframe out of the case.
If the midframe is stuck, slide it to the left first, and then lift it out.

Modifier

There are clips in the bottom of the case helping hold the midframe in. Lift the top of the midframe up enough to clear the black back piece and then slide up and out.

BJones - 21 mai 2016 Réponse