Réparez vos affaires Communauté Boutique

MacBook Unibody Model A1342 Lower Case Replacement

Introduction

Replacing your lower case is easy! It only takes 8 screws.

Ce dont vous avez besoin

  1. MacBook Unibody Model A1342 Lower Case Replacement, Lower Case: étape 1, image 1 de 1

    • Remove the eight 4 mm Phillips screws securing the lower case to the MacBook.

    Traduire

  3. MacBook Unibody Model A1342 Lower Case Replacement: étape 2, image 1 de 3 MacBook Unibody Model A1342 Lower Case Replacement: étape 2, image 2 de 3 MacBook Unibody Model A1342 Lower Case Replacement: étape 2, image 3 de 3

    • The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

    • Slightly lift the lower case near the vent opening.

    • Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

    • The location of these three clips is shown in the third picture.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

74 autres ont terminé cette réparation.

2 commentaires

Apple has a recall on this part, so you can get a replacement for an improved version free and save yourself $149.99. Check out http://www.apple.com/support/macbook-bot...

Shane - Réponse

Would the Macbook Pro back cover also fit this?

wow - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 13

30 derniers jours : 39

Total : 69,699