Nikon Coolpix S9050 LCD Screen Replacement
Introduction
Passez à l'étape 1Overtime, the components in a camera are likely to fail or become faulty. One component that may become faulty overtime is the screen. If your camera is not properly displaying the images you’ve taken or if there are dead pixels on your screen, the screen may need to be replaced. This guide will assist you in replacing the LCD Screen on the Nikon Coolpix S9050.
Ce dont vous avez besoin
-
-
Using a Phillips #000 screwdriver, remove the two 3.2mm black screws on both sides of the camera.
-
Set the camera face down and remove the four 3.2mm silver screws using the same screwdriver.
-
-
-
-
Remove the silver 3.2 mm Phillips #000 screw on the corner of the device to remove the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
IUPUI, Team S1-G5, Stella Fall 2019 Membre de l'équipe IUPUI, Team S1-G5, Stella Fall 2019
IUPUI-STELLA-F19S1G5
3 membres
5 tutoriels rédigés
