Historique de l'étape n° 1 de Insignia NS-F12R6-SS Upper Oscillation Gear Replacement

Modifications apportées à l'étape #1

Modifié par Justin Ogihara — 20 déc. 2018

Modification approuvée par Justin Ogihara

-	[* red] Using a Phillips~~-head~~ screwdriver, unscrew and remove the 7 mm long bolt and small washer fastening the yellow and green wire to the motor housing support.
+	[* red] Using a Phillips #3 screwdriver, unscrew and remove the 7 mm long bolt and small washer fastening the yellow and green wire to the motor housing support.