Modifications apportées à l'étape #1
Modifié par Lennert Dixson —
Modification approuvée par Lennert Dixson
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Remove all wires and ribbon cables attached to the motherboard. | |
| [* black] Some Wires have small black tabs on top of them. Meaning one must grab the tab and pull directly upward, gently. | |
| [* black] Some ribbon cables may require the blue opening tool to release the cable's connectors before pulling it out. | |
| [* black] Finally, some cables have a plastic head with small notches on the side. One must use their hand to gently wiggle this cable side to side to remove. | |
| [* icon_caution] The blue opening tool is recommended to avoid damaging the cables. | |
| + | [* icon_note] There should be a total of 8 wires/cables that must be removed from the motherboard. |