Modifications apportées à l'étape #3
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the 6 mm screws around the edges with the |
|---|---|
| + | [* red] Remove the 6 mm screws around the edges with the Phillips head screw driver. Then remove the 6mm screw holding the disc drive into place. |
| [* orange] Sliding out the disc drive will reveal the final two 4 mm screws on the bottom of the device. |