Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Arthur Shi

Modification approuvée par Arthur Shi

Avant
Après
Inchangé

Lignes de l'étape

[* black] Peel one of the end adhesive strips from the clear plastic backing.
+ [* icon_note] The strips are cut for a specific end and are not interchangeable.
[* black] Hold the strip by the two green end tabs and line the adhesive strip with the phone frame.
[* black] Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned.
[* black] Once aligned, use your fingers to press the adhesive into place.
[* black] Repeat the procedure for the remaining adhesive strip.