Modifications apportées à cette étape
Modifié par Ian Thompson —
Modification approuvée par Arthur Shi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] |
|---|---|
| + | [title] Node Setup Testing pt. 1 |
| [* blue] obtain a USB to TTL serial converter cable | |
| [* green] locate the GND and RXD lines (mine were black and yellow respectively, but always check first). Using jumper cables, attach the GND and RXD lines to a 5-pin terminal block as shown | |
| [* yellow] plug the 5-pin terminal block into the port shown |