Modifications apportées à l'étape #2
Modifié par Justin Ogihara —
Modification approuvée par Justin Ogihara
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Check bulbs for failure by looking for black coloring at the ends of the bulbs. |
|---|---|
| - | [* icon_note] If this is observed then remove the bulbs by twisting 90 degrees and carefully wiggling them and pulling down. |
| - | [* black] Replace with same type of bulb. If this does not fix the issue, remove all bulbs and move on to step 3 |
| + | [* red] Check the bulbs for failure by looking for black coloring at the ends of the bulbs. |
| + | [* black] Remove the bulbs by twisting 90 degrees and carefully wiggling them and pulling down. |