Modifications apportées à l'étape #2
Modifié par William Girard —
Modification approuvée par William Girard
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the |
|---|---|
| + | [* red] Remove the seven 7mm screws from the backplate by using a Phillips Head #0 screwdriver. |
| [* orange] Loosen the two back corner screws by using a Phillips Head #0 screwdriver. | |
| [* icon_note] The two back screws are not removable. A clicking sounds indicates that the screw is fully loosened. |