Modifications apportées à l'étape #5
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Use a PH1 screwdriver to take out the two 10mm screws from the motor's back. |
|---|---|
| - | [* icon_note] It's very important to remove the back because it attached to the rest of the motor. |
| + | [* red] Remove two 10 mm screws from the motor's back using a Phillips #1 screwdriver. |