Modifications apportées à l'étape #5
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Run a new cable through the earphone insert to prepare for attachment to the speaker. | |
| - | [* black] Using the ***''Wire Stripers''***, remove approximately 2 inch of the new connection cable protective sleeve. This will be the new connection to the speaker. |
| - | [* black] To prevent unraveling of the protective sleeve, burning the edges, using the ***''Heat Gun''***, is advised. |
| + | [* black] Remove approximately 2 inches of the new connection cable protective sleeve using a pair of wire strippers. |
| + | [* icon_note] This will be the new connection to the speaker. |
| + | [* icon_note] To prevent unraveling of the protective sleeve, securing the edges using a heat gun is advised. |