Modifications apportées à l'étape #1
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] After removing the battery, look inside of the bottom lid and locate the USB port control board. |
|---|---|
| - | [* black] Unscrew two screws holding the USB port control board in place using a Phillips #00 screwdriver. |
| - | [* black] Once the cap is unscrewed, remove the cap and USB port control board. |
| + | [* red] Remove two screws holding the USB port control board in place using a Phillips #00 screwdriver. |
| + | [* black] Remove the bracket and USB port control board from the base. |