Modifications apportées à l'étape #1
Lignes de l'étape
| [* black] Use a #1 Phillips head screwdriver to remove the screws on the RAM's cover panel, as seen in image. | |
| [* black] Then, use a flat edge tool to pry the cover off, as seen in image. | |
| - | [* |
| + | [* red] Use your fingers to push the RAM tabs, as seen in image, that secure the RAM outward (away from the RAM). The RAM should then pop up. |
| [* black] Finally, gently pull the RAM away from the connection. (Repeat this process until all the RAM has been removed from the device). |