Historique de l'étape n° 4 de Lenovo X130e LCD Replacement

	[title] Install the new LCD
	[* black] Get the new LCD. Inspect it for damage before installation.
-	[* black] Reconnect the LVDS cable to the new LCD. Push the tape down after it is plugged in. *Note: ~~It may help to put additional~~ tape on the cable. ~~The old~~ tape will ~~not hold as well as it used to~~.~~*~~
+	[* black] Reconnect the LVDS cable to the new LCD. Push the tape down after it is plugged in. *Note:* The tape on the cable will be worn. Replace the tape if you are concerned the cable will fall out.
	[* black] Screw the LCD into the LCD housing. Use the 4 screws previously removed before.
-	[* black] Power on the laptop to ~~make sure~~ the new LCD ~~works~~. If it works, ~~put~~ the bezel back ~~on and reassemble~~ the ~~rest of~~ the ~~way~~.
+	[* black] Power on the laptop to test the new LCD. If it works, snap the bezel back onto the laptop. Finish reassembling the laptop.