Modifications apportées à l'étape #7
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Remove the 3 mm Phillips head screw that is between the circuit boards. | |
| - | [* icon_reminder] |
| + | [* icon_reminder] The other screw was the 4 mm screw that is between the circuit boards was taken off during step five of this guide. |
| [* orange] Remove the next three 3.5 mm Phillips head screws that are on the button circuit board. |