Modifications apportées à l'étape #10
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Use the plastic opening tool to separate the button circuit board from the shutter button and the settings dial housing unit. | |
| [* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board away from the ZIF connector that is attached to the motherboard. | |
| - | [* icon_caution] Be careful |
| + | [* icon_caution] Be careful not to rip the ribbon cable out of the ZIF connector when removing. |
| [* black] Remove the user button circuit board. |