Modifications apportées à l'étape #8
Modifié par Carlo Calvillo —
Modification approuvée par Carlo Calvillo
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Using the metal tweezers, disconnect the main ZIF display connector from display by placing the tips of tweezer on each side of the attached connector. |
|---|---|
| + | [* black] Place the metal tweezer tips between the ZIF connector and the wire-to-board connection. |
| + | [* black] Carefully separate ZIF wire-to-board connection by pulling metal tweezers in a downward motion. |
| + | [* black] Pull up on Flat wire until display is completely disconnected. |
| + | [* icon_caution] Be very careful when separating ZIF connections . The ends of the ZIF wire connectors are delicate and can break easily. |