Modifications apportées à l'étape #1
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Turn the keyboard bezel so that the touchpad is close to you. |
|---|---|
| - | [* red] Dissassemble the ribbon cable from the receptacle on the touchpad circuit board. |
| - | [* icon_note] The ribbon cable will not tear apart because it is attached to the bracket that holds the touchpad in place. |
| - | [* orange] Take out the four 2.9mm screws from the bracket using a Phillips head #0 screwdriver. |
| - | [* black] To detach the touchpad, simply thrust the touchpad from the top of the keyboard bezel on the touch-sensitive side. |
| - | [* icon_note] This should not require any force. |
| + | [* black] Turn the keyboard so that the touchpad is close to you. |
| + | [* red] Detach the ribbon cable from the connector on the touchpad circuit board using your fingernail or an opening tool. |
| + | [* orange] Remove the four 2.9 mm screws from the bracket using a Phillips #0 screwdriver. |
| + | [* black] Remove the touchpad from the top of the keyboard bezel on the touch-sensitive side. |