iFixit Side Stack Retail Display Assembly
-
-
Box should include:
-
Set of screws/driver
-
Metal rods
-
Honeycomb Base/Feet
-
Main stand (back/sides)
-
Two large, one small foldable shelf insert
-
Two large, one small black rectangular insert
-
"You can fix it" panel and iFixit topper (not pictured)
-
-
-
The three angled supports fit into the two rectangular supports.
-
Place the fully constructed honeycomb base into the display.
-
-
-
Fit “You can fix it” panel over front of honeycomb base
-
“You can fix it” panel sides fit INSIDE of base walls
-
Use screws to fasten
-
-
-
-
Build bottom shelf, using one of two larger foldable shelves
-
Tabs fit together, fit side tabs along back, then fold over and secure
-
-
-
Install two metal support for middle shelf
-
Metal rods fit into provided holes
-
-
-
Fit bottom shelf into bottom shelf slots cut into back of display
-
Tabs go out the back and then back in towards the front
-
Lay black shelf insert into shelf
-
Fit screws together to hold shelf in place
-
Repeat for middle and top shelves
-
Top shelf and insert are smaller than bottom and middle shelves
-
-
-
Fold top section down to make holes match
-
Align iFixit sign and install using screws
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
