Traduction de l’étape 3
Étape 3
Disconnect all wires from the PCB
-
Disconnect all wires from the main PCB assembly:
-
The photocell wire connector labeled CN3 on the board
-
The white wire connector labeled CN2 on the board
-
The orange wire labeled MOTOR1 on the board
-
The igniter wire connector labeled CN1 on the board
-
The yellow wire labeled ACIN1 Yellow on the board
-
The white wire labeled ACIN2 White on the board
-
The red wire labeled MOTOR2 Red on the board.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.