Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 1
Étape 1
-
Using a Phillips #00 screwdriver, remove the 3 mm screw that secures the wireless-card bracket and wireless card to the I/O board.
-
Lift the wireless-card bracket off of the wireless card.
-
Disconnect the white and black antenna cables from the wireless card.
-
Slide and remove the wireless card from the wireless card slot.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.