Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 3
Étape 3
-
Use a Phillips #1 screwdriver to remove the nine 3.2 mm screws from the motherboard.
-
Use a plastic spudger to lift the flaps covering the pins. Disconnect the pins from the motherboard.
-
Use a plastic spudger to disconnect the two wires connected to the CPU.
-
Use a plastic spudger to disconnect the pin on the bottom left of the motherboard.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.