Traduction de l’étape 5
Étape 5
Install the logic board shield
-
Use tweezers or your fingers to remove the protective paper lining from the Tesa tape.
-
Align the shield over the logic board in the correct orientation.
-
Lay the shield over the logic board.
[title] Install the logic board shield | |
[* icon_caution] Be very careful during this step! The Tesa tape is very sticky, and the shield can't be repositioned once it sticks. | |
- | [* black] Use tweezers or your fingers to remove the protective paper lining from the Tesa tape. |
+ | [* black] Use [product|IF145-020|tweezers] or your fingers to remove the protective paper lining from the Tesa tape. |
[* black] Align the shield over the logic board in the correct orientation. | |
[* black] Lay the shield over the logic board. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.