Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 6 tutoriels qui comprennent cette étape.
Traduction de l’étape 3
Étape 3
Reassembly information
-
Prop up the bottom edge of the tablet on a box or similar object. Tilt the screen open and lean it against something so that it's angled up to 90 degrees.
-
Reconnect the small front sensor cable ZIF connector.
-
Reconnect the large screen cable ZIF connector.
-
Reconnect the battery press connector.
-
Use your Torx Plus 3IP driver to install the two 2.6 mm screws and fasten the connector cover.
-
Continue reassembly with these cables connected.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.