Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.
Traduction de l’étape 4
Étape 4
-
Use a Phillips #00 to remove the four 6 mm screws attaching the thumbsticks to the circuit board.
-
Use a spudger to flip up the locking flaps of the ZIF connectors.
-
Use tweezers or your fingers to gently pull the red ribbon cables out of their sockets.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.