Traduction de l’étape 1
Étape 1
-
Remove the five 7.5mm phillips screws using a PH000 screwdriver.
-
Using tweezers, pull up the plate covering the touchpad. The center ribbon cable will slide through this plate.
[* red] Remove the five 7.5mm phillips screws using a PH000 screwdriver. | |
- | [* black] Using tweezers, pull up the plate covering the touchpad. The center ribbon cable will slide through this plate. |
+ | [* black] Using [product|IF145-020|tweezers], pull up the plate covering the touchpad. The center ribbon cable will slide through this plate. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.