Aller au contenu principal

iPad Mini 3 Wi-Fi LCD-Abschirmung tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 3

Étape 3
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Platziere vorsichtig einen Saugheber etwa auf der Mitte der erwärmten Seite.

Achte darauf, dass der Saugheber komplett flach auf dem Bildschirm aufliegt, damit er gut haftet.

Halte das iPad mit der einen Hand nach unten nach unten und ziehe gleichzeitig den Saugheber mit der anderen Hand ganz vorsichtig nach oben, um das Front Panel Glas vom Rückgehäuse zu lösen.

Achte darauf, dass du das Glas nur so weit anhebst, dass du ein Plektrum dazwischen setzen kannst – je weiter du das Glas anhebst, desto mehr riskierst du eine Beschädigung des Glases.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.