Aller au contenu principal

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 8

Étape 8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

挿入した最初のピックを取り、iPad上部コーナーに向けてスライドさせます。

フロントガラス越しに開口部のピックの先端が見える場合は、慌てる必要はありませんが、開口ピックを少し外側へ引き出してください。 ほとんどの場合、問題はありませんが、LCD前面に接着剤が付着してクリーニングが困難になる可能性があるため、ご注意ください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.