Aller au contenu principal

iMac (27 Zoll, 2019, Retina 5K Display, Intel) Displayeinheit tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 22

Étape 22
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 1 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 2 de 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement, Remove the remaining adhesive: étape 0, image 3 de 3
Remove the remaining adhesive
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Wenn du am Netzteil arbeitest, musst du sehr vorsichtig sein: Berühre keine Kondensatoranschlüsse oder offenliegende Lötstellen auf der Rückseite (rot eingerahmt).

Greife die kleine Lasche am Ende von einem der unteren Displayklebestreifen und ziehe die Streifen nach oben, um ihn zu entfernen.

Wiederhole den Schritt mit dem anderen Klebestreifen und entferne ihn.

Löse, falls nötig, eventuelle übrige Klebestellen mit einer Plastikkarte auf.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.