Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.
Traduction de l’étape 1
Étape 1
-
Lift the latch holding down the ribbon cable. Remove the cable away from the port.
-
Remove the screw holding down the button in place using a Phillips #0 screwdriver.
-
Grabbing the cushioning of the button, lift it upwards from the assembly.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.