Aller au contenu principal

iPad Air Wi-Fi フロントパネルの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 76 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 6

Étape 6
iPad Air Wi-Fi Front Panel Replacement: étape 0, image 1 de 2 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 2 de 2
  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad.

  • For complete instructions on how to use a hair dryer, check out this guide.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.

  • Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

青いハンドルをヒンジから離して前方に向かって押し、オープニングモードにします。

画面が十分に熱くなっていない場合は、ドライヤーを使ってiPadの左端に沿って熱を加えることができます。

ヘアードライヤーの詳しい使い方は、こちらのガイドをご覧ください。

接着剤がはがれて、底面が開くまでそのまま1分ほど同じ状態を保ちます。

リバースクランプで十分な隙間ができたところで、スクリーンのフレームの下にオープニングピックを挿入します。

リバースクランプで十分な隙間ができない場合は、その部分にさらに熱を加えて、ハンドルを時計回りに半回転させてください。

一度に半回転以上回さず、1分ほど待ってからさらに半回転、回します。時間をかけてリバースクランプを回していきます。

次の2つの手順はスキップしてください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.