Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 2

Étape 2
Remove the Home Button bracket and peel up the tape connected to it. During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
  • Remove the Home Button bracket and peel up the tape connected to it.

  • During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it

  • Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.

  • Secure the bracket with hot-melt glue, superglue, or high-strength double-sided tape. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.

Rimuovi la copertura del tasto Home e il nastro adesivo attaccato a questa.

Durante il rimontaggio, dopo aver installato il tasto Home, dovrai reincollare questa staffa in posizione per fissarla.

Rimuovi quanto più adesivo possibile dalla copertura, quindi puliscila con dell'acetone o dell'alcool isopropilico ad alta concentrazione (>90%).

Fissa la copertura con della colla a caldo, supercolla (cianoacrilica), o del nastro biadesivo molto resistente. Assicurati che la copertura sia allineata correttamente prima di incollarla, o il tasto Home non cliccherà quando lo premi.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.