Aller au contenu principal

iPad Air セルラーモデルのロジックボードの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 26

Étape 26
iPad Air LTE Logic Board Replacement: étape 0, image 1 de 3 iPad Air LTE Logic Board Replacement: étape 0, image 2 de 3 iPad Air LTE Logic Board Replacement: étape 0, image 3 de 3
  • Slide the flat end of a spudger under the Lightning connector cable to break up the adhesive securing it to the rear case.

  • If necessary, push the left speaker cable gently aside to provide access to the Lightning connector cable.

スパッジャーの平面側の先端をLightningコネクターケーブルの下に差し込み、背面ケースに留められた接着剤を剥がします。

必要であれば、Lightningコネクターケーブルの作業がしやすいように、左側のスピーカーケーブルを丁寧に脇へ寄せてください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.