Non inscrit
Ce wiki n'apparaîtra pas dans les résultats d'une recherche, mais pourra être vu par tous !
- Check your batteries are fully charged before takeoff.
- This includes both the flight pack in your drone as well as the batteries in your remote control! Find more information on batteries here.
- Conduct a 'nudge' test before takeoff, once the flight controller is armed.
- With some flight controllers (3DRobotics, DJI), the drone will respond to roll/tilt input before leaving the ground.
- Forward pitch should result in an increase in the rear motors speed.
- Left roll should result in an increase in the right motors speed.
- With some flight controllers (3DRobotics, DJI), the drone will respond to roll/tilt input before leaving the ground.
- Check vehicle indication lights and telemetry data if available.
- 3DRobotics and DJI flight controllers have indication lights for GPS and arm status.
- Errors in GPS, compass, and calibration are easy to spot with telemetry data.
Équipe
Cal Poly, Team 25-89, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-89, Amido Spring 2010
CPSU-AMIDO-S10S25G89
4 membres
61 tutoriels rédigés
2 commentaires
Excelente información.
manuelbeltran - Réponse
Great List, there is also an article here which talks about the stuff you need before you leave, don't forget your SD or extra batteries like I did. http://dronewisdom.com/drone-checklist/
jbabin1 - Réponse