4 Hp Compaq Dx7300 Microtower
Hello all, I have a rebuilt hp dx7300M/E6300/250hnqm/1.0R/j s/n:HUB7251CNB that refuses to post. I checked psu interior, seemes fine, recapped MB board,most of 6.3v470uf were blown/bulged, however after pressing pwr buton, fan stops and 10 beeps appear+ orange led , manual says it's "Bad option card" whatever that means, I don't have any cards inside. Tested dx7300 with stock atx psu, or a pcie gpu... made no difference. Problem persists. I need some assistance, don't want to trow away the pc.
Cette question est-elle utile ?
Indice
0
@ediflorianus try clear cmos first, and reseat CPU.
test boot up with only one RAM stick at a time
par Augustine
Same issue, changed 10 modules different configuration, different cpu.no differences
par ediflorianUS