Traduction de l’étape 3
Étape 3
-
Remove the six 2.3mm Phillips #0 screws from the motherboard.
-
Use a pair of tweezers to lift up the tab on the ZIF connector and pull out the ribbon cable.
| [* red] Remove the six 2.3mm Phillips #0 screws from the motherboard. | |
| - | [* orange] Use a pair of tweezers to lift up the tab on the ZIF connector and pull out the ribbon cable. |
| + | [* orange] Use a pair of [product|IF145-020|tweezers] to lift up the tab on the ZIF connector and pull out the ribbon cable. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.