Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 5
-
Grab an adhesive strip's pull tab and slowly pull it out from underneath the battery tray.
-
Pull the adhesive strip until it's freed from under the battery tray. Give the strip plenty of time to stretch.
-
Repeat for all six adhesive strips.
-
Use your spudger to depress the piece of foam near the lower right strip as you pull.
-
Use a pipette or syringe to dispense a few drops of highly-concentrated isopropyl alcohol (over 90%) under the sections of the battery tray where the strips broke. Tilt the tablet to let the isopropyl alcohol flow underneath.
-
Wait two minutes, then use a spudger to pry up the battery tray.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.