Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
Flip the skateboard back over.
-
Remove the six 22 mm bolts indicated on the top side of the skateboard with a 3 mm Allen key.
-
While holding the nut from the underside of the skateboard remove the four 32 mm bolts with the 3 mm Allen key.
-
Separate the trucks and control module from the board.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.