Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.
Traduction de l’étape 5
Étape 5
-
Remove the 20 mm Phillips #0 screw.
-
Disconnect the DC connector. The DC connector can be identified as the connector with only two wires.
-
Disconnect the power button. It is a temporary switch, which can be identified by its 4-wire configuration.
-
Disconnect the Hall effect sensor. It can be identified by its 6-wire configuration.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.