Aller au contenu principal

iPad Mini CDMA LCD 组件更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 42 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 11

Étape 11
iPad Mini CDMA LCD Assembly Replacement: étape 0, image 1 de 3 iPad Mini CDMA LCD Assembly Replacement: étape 0, image 2 de 3 iPad Mini CDMA LCD Assembly Replacement: étape 0, image 3 de 3
  • Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.

  • The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.

  • If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

从设备的右上角开始,将撬棒滑入LCD框和金属背板之间,当您推动撬棒时也会分离两者之间的粘合剂。

我们的目标是分离粘合剂,而不是撬起LCD。 所以尽量小角度撬动,防止损伤LCD。

如果在LCD边角处深入撬棒会使得LCD弯曲,使用吉他拨片来重复上述动作来进一步分离粘合剂。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.