Aller au contenu principal

フロントパネルアセンブリの取り外し

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 4

Étape 4
Front Panel Assembly Removal, Disconnect the display cables: étape 0, image 1 de 3 Front Panel Assembly Removal, Disconnect the display cables: étape 0, image 2 de 3 Front Panel Assembly Removal, Disconnect the display cables: étape 0, image 3 de 3
Disconnect the display cables
  • Use the flat end of a spudger to pry up and disconnect the two digitizer cable press connectors.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

デジタイザケーブルのプレスコネクタ2個を、スパジャーの平面側先端を使ってこじ開け、外します。

iPadの破損を避けるため、ロジックボード上のソケットではなく、コネクタのみをこじ開けるようにしてください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.