Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

iPad Air Wi-Fi Front Panel Assembly Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 26 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Néerlandais

Étape précédente

Traduction de l’étape 5

Étape 5

iPad Air Wi-Fi Front Panel Assembly Replacement: étape 0, image 1 de 2

iPad Air Wi-Fi Front Panel Assembly Replacement: étape 0, image 2 de 2

Remove the front panel assembly.
During reassembly, wipe any dust or fingerprints off of the inside of the front panel assembly to ensure a clean display.
If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.
Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.
The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.