Aller au contenu principal

Reemplazo de la tapa trasera del Samsung S6

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 25 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 6

Étape 6
Samsung Galaxy S6 Rear Glass Replacement: étape 0, image 1 de 2 Samsung Galaxy S6 Rear Glass Replacement: étape 0, image 2 de 2
  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

Para instalar un cristal trasero nuevo:

Usa pinzas para despegar cualquier adhesivo restante de cristal trasero y el chasis del teléfono.

Luego, limpia las áreas de adhesión con alcohol isopropólico de concentración alta ( al menos 90%) y un paño anti-pelusa. Desliza en una dirección solamente, no desde atrás hacia adelante. Esto ayudará a preparar la superficie para un adhesivo nuevo.

Despega el adhesivo del nuevo cristal trasero, alinea cuidadosamente un borde del cristal contra el chasis del teléfono y presiona firmemente el cristal contra el teléfono.

Si estás reinstalando el viejo cristal trasero, o usando el cristal trasero sin el adhesivo preinstalado, sigue esta guía.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.