Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 13

Étape 13
Use painter's tape or masking tape to temporarily secure the bottom edge of the display to the iMac's enclosure. The tape preserves the display's alignment, and allows you to safely swing the top edge of the display open to access the display cables.
  • Use painter's tape or masking tape to temporarily secure the bottom edge of the display to the iMac's enclosure.

  • The tape preserves the display's alignment, and allows you to safely swing the top edge of the display open to access the display cables.

Répétez les 3 étapes précédentes pour placer la bande 15 sur le côté gauche du bord inférieur de l'arrière du panneau de l'écran.

Les bandes 14 et 15 devraient venir en butée bord à bord au centre de l'écran.

[* black] Repeat the previous 3 steps to place strip 15 on the left side ofUse painter's tape or masking tape to temporarily secure the bottom edge of the back of the display panel.
[* black] Strips 14
to the iMac's enclosure.
[* icon_note] The tape preserves the display's alignment,
and 15 should butt up against each other inallows you to safely swing the centertop edge of the displaydisplay open to access the display cables.
[* black] Repeat the previous 3 steps to place strip 15 on the left side ofUse painter's tape or masking tape to temporarily secure the bottom edge of the back of the display panel.
[* black] Strips 14
to the iMac's enclosure.
[* icon_note] The tape preserves the display's alignment,
and 15 should butt up against each other inallows you to safely swing the centertop edge of the displaydisplay open to access the display cables.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.